Calibration Of DECEL G Sensor: Description

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

Decel G sensor calibration must be performed when the following operation is performed.

Removal and installation or replacement of yaw rate/side/decel G sensor
Replacement of A/T assembly
Replacement of control valve & TCM
Replacement of ABS actuator and electric unit (control unit)

CAUTION: After removing/replacing the yaw rate/side/decal G sensor or replacing the ABS actuator and electric unit (control unit), the decel G sensor of the ABS actuator and electric unit (control unit) must be calibrated first. Refer to "DESCRIPTION ".