DTC Confirmation Procedure

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

PRECONDITIONING
1. Turn ignition switch OFF and wait at least 10 seconds.
2. Turn ignition switch ON.
3. Turn ignition switch OFF and wait at least 10 seconds.
TESTING CONDITION:

Before performing the following procedure, confirm that battery voltage is 10 V or more at idle.

: GO TO 2.
PERFORM DTC CONFIRMATION PROCEDURE
1. Start engine and let it idle for at least 1 second.
2. Check DTC.
Is DTC detected?

YES: Go to "DIAGNOSIS PROCEDURE ".

NO: INSPECTION END