Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Isuzu >> 1988 >> Trooper II Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> I-TEC Control System >> TCU Trouble Codes >> TCU Code 1 - Knock Sensor Signal

TCU Code 1 - Knock Sensor Signal

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Check for short between ECU and TCU harness. Disconnect harness connectors at ECU and TCU. Check that continuity exists between pin No. 23 on ECU and pin No. 20 on TCU. Check that no continuity exists between pin No. 20 on TCU and ground. If tests are not proper, repair or replace harness.
  2. If tests in step 1) are proper, go to ECU CODE 66 (IMPULSE) - KNOCK SENSOR CIRCUIT  .
scientia non olet · About Brad's Car Manuals