Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Isuzu >> 1989 >> I-Mark LS >> Repair and Diagnosis >> Engine Performance >> System >> System/Component Tests - EFI >> Fuel System >> Fuel Control >> Dropping Resistors

Dropping Resistors

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Unplug dropping resistor wire connector. Resistor is located on firewall in engine compartment.
  2. Measure resistance between center terminal of resistor connector and other terminals. Standard resistance at all terminals should be 5-7 ohms at room temperature. If any measurment deviates from standard value, replace dropping resistor.
scientia non olet · About Brad's Car Manuals