Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Isuzu >> 1999 >> Rodeo LS 4WD V6-3.2L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Relays and Modules - Ignition System >> Ignition Control Module >> Service and Repair

Ignition Control Module: Service and Repair

Download the full database via torrent (~1.1 TB)
REMOVAL
1. Disconnect battery ground cable.
2. Ignition Module Connector.




3. Removal Ignition Module (1).

INSTALLATION




1. Install the Ignition Module (1).
Connect ignition module connector and ignition coil, then tighten bolt to the specified torque.
Torque: 20 N.m (15lb ft)
2. Connect battery ground cable.

scientia non olet · About Brad's Car Manuals