HVAC Control Module Programming and Setup - Auxiliary

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

HVAC CONTROL MODULE PROGRAMMING AND SETUP - AUXILIARY

Each of the following service procedures may require programming or setup procedures to be performed on the auxiliary HVAC control module or HVAC actuators.

Auxiliary HVAC Control Module Replacement
If the auxiliary HVAC control module is replaced no additional procedures are necessary.

Auxiliary HVAC Control Module Reprogramming
Do not reprogram the auxiliary HVAC control module, unless directed by a service procedure, or a service bulletin.

Reprogram HVAC Control Module-Refer to Service Programming System (SPS) .

Actuator Replacement
If an actuator is replaced, the following procedure must be performed:
- Re-Calibrating Actuators-Refer to Re-Calibrating Actuators (Primary) Re-Calibrating Actuators (Auxiliary HVAC) in HVAC Systems - Automatic.
- Re-Calibrating Actuators-Refer to Re-Calibrating Actuators (Primary) in HVAC Systems - Manual.