Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Jaguar >> 2000 >> XJ8 Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Diagnostic Procedures >> Ignition Checks >> Ignition Coil

Ignition Coil

Download the full database via torrent (~1.1 TB)

Turn ignition off. Disconnect appropriate ignition coil harness connector. Measure resistance between ignition coil terminals. On S-Type, resistance should be.5-1.0 ohm. On XJR, XJ8 and XK8, resistance should be.54-1.04 ohms. On all models, replace ignition coil if resistance is not as specified.

scientia non olet · About Brad's Car Manuals