Conditions For Reprogramming

Make sure the following conditions are checked and corrected, as necessary, before performing reprogramming procedure:

• Engine oil level.
• Coolant level.
• Fuel level greater than 30 percent but less than 80 percent.
• Fuel filler cap seal is in good condition and cap is correctly fitted and secure.
• All repair work relating to DTCs completed.
• Fuel, ignition and cooling systems are in good order.
• All Diagnostic Trouble Codes (DTCs) cleared.
• All repair work relating to DTCs completed.
• Fuses, harnesses and electrical connectors are in good order.