External Control
- General Procedures
- Description & Operation
- Diagnosis & Testing
- Quick Reference Fault Chart
- Shift Stuck In "P"
- Vehicle Rolls On "P"
- "R" Does Not Engage
- "N" Not Achieved
- "D" Does Not Engage
- Lower Ratios Will Not Hold
- Shift Lever Position Not Visually Correct
- Shift Lever Has No Effect Upon The Transmission And Resistance Cannot Be Felt
- Shift Lever Position Not Align Correctly Following Manual Selection Of Lower Ratios
- Shift Lever Detent Indistinct In 3 Causing Poor Location
- Shift May Be Moved From P Without Brake Pedal Operation
- Engine May Be Started In Positions Other Than "P" Or "N"
- Shift Lever Vibration
- Noise/Rattle from "J" Gate
- Quick Reference Fault Chart
- Removal & Installation