Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Jeep >> 1992 >> Cherokee Limited >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Synchronization Signal Generator >> Removal & Installation

Removal & Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Remove distributor cap, rotor, and distributor. Remove pulse ring mounting screws and remove pulse ring. Using pin punch and hammer, remove distributor gear roll pin.
  2. Using a rubber mallet, tap distributor shaft out until distributor gear and shim are removed. Slide shaft out of distributor housing. Remove sync (synchronization) signal generator stator mounting screws and positioning arm.
  3. Slide wiring harness grommet out of distributor housing. Remove synch signal generator. To install, reverse removal procedure.
scientia non olet · About Brad's Car Manuals