Hard Wired Inputs

The hard-wired inputs to the BCM include the following:

• A/C switch signal
• Ambient temperature sensor signal
• Body control module flash enable
• Coolant level switch sense
• Door ajar switch sense (two circuits, one left rear and one right rear)
• Driver seat heater switch MUX
• Fog lamp switch sense
• Fused B (+)
• Fused ignition switch output (run-acc)
• Fused ignition switch output (st-run)
• Ground (five circuits, two Z1 and three Z2)
• Hazard switch sense
• Headlamp switch MUX
• High beam switch sense
• Hood ajar switch sense (export only)
• Key-in ignition switch sense
• Liftgate ajar switch sense
• Liftgate courtesy disable
• Liftgate flip-up ajar switch sense
• Panel lamps dimmer signal
• Park lamp relay output
• Passenger seat heater switch MUX
• PCI bus
• Radio control MUX
• Rear window defogger switch sense
• Seat belt switch sense
• Ultralight sensor signal
• Washer fluid switch sense
• Washer pump switch sense
• Windshield wiper switch MUX
• Wiper park switch sense