Hard Wired Inputs
The hard wired inputs to the BCM include the following:
- A/C on/off control
- Ambient temperature sensor signal
- Body control module flash enable
- Door lock switch MUX
- Driver door ajar switch sense
- Flip-up glass ajar switch sense
- Flip-up glass release switch sense
- Fog lamp switch sense
- Front wiper park switch sense
- Front wiper switch MUX
- Front washer pump driver
- Fused B+
- Fused ignition switch output (run-acc)
- Fused ignition switch output (run-start)
- Headlamp switch MUX
- High beam switch sense
- Hood ajar switch sense (premium with VTSS) in markets where required only
- Key-in ignition switch sense
- Left cylinder lock switch sense (premium with VTSS only) omitted in some markets as required
- Panel lamps dimmer switch MUX
- Passenger door ajar switch sense (input from 3 ajar switches connected in parallel)
- Radio control MUX (premium with remote radio switches only)
- Rear courtesy lamp control
- Rear window defogger control
- Rear wiper intermittent driver
- Rear wiper on driver
- Right cylinder - lock switch sense (premium with VTSS only) omitted in some markets as required
- RKE antenna (2 circuits) premium with RKE only
- Tailgate ajar switch sense
- Tailgate cylinder lock switch sense
- Vehicle speed sensor