Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Jeep >> 2004 >> Liberty Limited, RWD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Accelerator Pedal >> Installation

Accelerator Pedal: Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Place accelerator pedal assembly over 2 studs protruding from floor pan.
  2. Install 2 mounting nuts. Refer to TORQUE .
  3. Slide throttle cable into opening slot in top of pedal arm.
  4. Push plastic cable retainer (clip) into accelerator pedal arm opening until it snaps into place.
  5. Before starting engine, operate accelerator pedal to check for any binding.