Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Jeep >> 2004 >> Liberty Limited, RWD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Level Sending Unit/Sensor >> Installation

Fuel Level Sending Unit/Sensor: Installation

Download the full database via torrent (~1.1 TB)
  1. Connect necessary wiring into electrical connectors. Connect 4-wire connector to upper section of pump module.
  2. Position sending unit to pump module. Slide and snap into place.
  3. Install lower section of fuel pump module. Refer to FUEL PUMP MODULE .
scientia non olet · About Brad's Car Manuals