Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Jeep >> 2004 >> Liberty Limited, RWD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Intake Air Temperature Sensor >> Installation >> 2.4L

Intake Air Temperature Sensor: Installation: 2.4L

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches

The intake manifold air temperature (IAT) sensor is installed into the intake manifold plenum at the rear end of the intake manifold.

  1. Check condition of sensor o-ring.
  2. Clean sensor mounting hole in intake manifold.
  3. Position sensor into intake manifold and rotate clockwise until past release tab.
  4. Install electrical connector.