Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Jeep >> 2004 >> Wrangler X, Automatic >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Accelerator Pedal >> Installation

Accelerator Pedal: Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Place accelerator pedal assembly over mounting studs protruding from floor pan. Tighten mounting nuts to 8.5 N.m (75 in. lbs.) torque.
  2. Slide throttle cable into opening (slot) in top of pedal arm. An index tab is located on pedal arm. Rotate and push plastic cable retainer (clip) into accelerator pedal arm opening until it snaps into place on index tab.
  3. Before starting engine, operate accelerator pedal to check for any binding.
scientia non olet · About Brad's Car Manuals