Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection >> Injector-Fuel >> Installation >> 3.7L

Fuel Injection: Injector-Fuel: Installation: 3.7L

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
Fig 1: Injector Retaining Clip
GC0006567Courtesy of DAIMLERCHRYSLER CORP.
  1. Install fuel injector(s) (3) into fuel rail assembly (4) and install retaining clip(s) (2). See Fig 1.
  2. If same injector(s) is being reinstalled, install new O-ring(s).
  3. Apply a small amount of clean engine oil to each injector O-ring. This will aid in installation.
  4. Install fuel rail (Refer to FUEL SYSTEM/FUEL DELIVERY/FUEL RAIL - INSTALLATION) .
  5. Start engine and check for fuel leaks.