Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Jeep >> 2007 >> Commander Overland, RWD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection - Diesel >> Sensor-Boost Pressure >> Installation >> Boost Pressure Sensor

Boost Pressure Sensor

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
Fig 1: Locating Boost Pressure Sensor
GC0039522Courtesy of CHRYSLER LLC
1 - AIR FLOW CONTROL VALVE
2 - BOOST PRESSURE SENSOR
3 - CHARGE AIR CROSS OVER TUBE
4 - EGR TUBE
  1. Position the boost pressure sensor onto the charge air cross over tube and install the fasteners. See Fig 1. Tighten the fasteners to 9 N.m (80 in. lbs.).
  2. Connect the sensor wiring harness connector.
  3. Connect the negative battery cable.
scientia non olet · About Brad's Car Manuals