Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Jeep >> 2007 >> Commander Overland, RWD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection - Gas >> Sensor-Map >> Installation >> Map Sensor - 3.7L/4.7L

Map Sensor - 3.7L/4.7L

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
Fig 1: Locating MAP Sensor O-Ring - 3.7L/4.7L
GC0006593Courtesy of CHRYSLER LLC
  1. Clean MAP sensor mounting hole at intake manifold.
  2. Check MAP sensor o-ring seal (2) for cuts or tears.
    Fig 2: MAP Sensor Location - 3.7L/4.7L
    GC0051558Courtesy of CHRYSLER LLC
  3. Position MAP sensor into manifold by sliding sensor over locating pin (6).
  4. Install mounting bolt (8). Tighten to 3 N.m (25 in. lbs.) torque.
  5. Connect electrical connector (2).
scientia non olet · About Brad's Car Manuals