Diagnostic Test

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

REPLACE THE FRONT CONTROL MODULE IF DTC IS ACTIVE
1. With the scan tool, read the active DTCs.
  Does the scan tool display this DTC as active?
  
  Yes
  - Replace and program the Front Control Module in accordance with the Service Information.
  - Perform the BODY VERIFICATION TEST. See DTC-Based Diagnostics/MODULE, Front Control (FCM) - Standard Procedure
  No
  - If the DTC is stored, check for an intermittent condition. Visually inspect the related wiring harness connectors. Look for broken, bent, pushed out, or corroded terminals.