Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Jeep >> 2010 >> Commander 2WD V8-5.7L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Coolant Temperature Sensor/Switch (For Computer) >> Service and Repair >> Engine Coolant Temperature Sensor - Installation

Engine Coolant Temperature Sensor - Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches





5.7L ENGINE










1. Apply thread sealant to sensor threads.
2. Install sensor into engine.
3. Tighten sensor to 11 Nm (8 ft. lbs.) torque.
4. Connect electrical connector to sensor.
5. Carefully bolt air conditioning compressor onto the front of engine.
6. Install accessory drive belt Serpentine Accessory Drive Belt - Installation.
7. Replace any lost engine coolant. Service and Repair.