Diagnostic Test

Download the full database via torrent (~1.1 TB)

REPLACE THE FRONT CONTROL MODULE IF DTC IS ACTIVE
1. With the scan tool, read the active DTCs.
  Does the scan tool display this DTC as active?
  
  Yes
  - Replace and program the Front Control Module in accordance with the Service Information.
  - Perform the BODY VERIFICATION TEST. See DTC-Based Diagnostics/MODULE, Front Control (FCM) - Standard Procedure
  No
  - If the DTC is stored, check for an intermittent condition. Visually inspect the related wiring harness connectors. Look for broken, bent, pushed out, or corroded terminals.