Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Jeep >> 2010 >> Compass Limited, EDG, Automatic CVT >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control (Service Information) >> CAPACITOR, Ignition >> Installation >> Installation

CAPACITOR, Ignition: Installation: Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
Fig 1: Removing/Installing Ignition Capacitor
GC0084713Courtesy of CHRYSLER LLC
  1. Install ignition coil capacitor (2) and bolt (3), tighten bolt to 10 N.m (88.5 ft. lbs.).
  2. Connect electrical connector (1).
  3. Connect the negative battery cable, tighten the nut to 5 N.m (45 in. lbs.).
scientia non olet · About Brad's Car Manuals