Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Jeep >> 2012 >> Compass 2WD L4-2.4L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Variable Valve Timing Solenoid >> Service and Repair >> Oil Intake Control Valve - Installation >> Front

Front

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches





FRONT SOLENOID 1/1





1. Solenoid for front location 1/1. Note mounting tab location is different between front and rear solenoids.





2. Install solenoid into cylinder head.
3. Install mounting bolt and tighten to 12 Nm (9 ft. lbs.).





4. Install oil pressure sensor.
5. Connect electrical connector to oil pressure sensor.
6. Connect electrical connector to Variable valve timing solenoid.
7. Connect negative battery cable.
8. Install engine cover.