Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Jeep >> 2012 >> Grand Cherokee Laredo, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Sensor, Coolant Temperature >> Installation >> 3.0L

Sensor, Coolant Temperature: Installation: 3.0L

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
Fig 1: Temperature Sensor & Thermostat Housing
GC0146951Courtesy of CHRYSLER GROUP, LLC
  1. Apply MOPAR® thread sealant with PFTE to the sensor threads.
  2. Install the coolant temperature sensor (2) into water pump housing (3).
  3. Tighten the coolant temperature sensor to 11 N.m (8 ft. lbs.).
  4. Connect the coolant temperature sensor electrical connector.
  5. Install air intake system.
  6. Replace any lost engine coolant. Refer to STANDARD PROCEDURE .