Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Jeep >> 2012 >> Wrangler Rubicon, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Ignition System (Service Information) >> Plug, Glow >> Installation >> Installation

Plug, Glow: Installation: Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
Fig 1: Glow Plugs & Wiring Harness
GC0082161Courtesy of CHRYSLER GROUP, LLC
  1. Apply a small amount of clean diesel oil or motor oil to glow plug threads.
  2. Attach a flexible tool such as a rubber hose to install glow plug into cylinder head. Tighten each plug to 14 N.m (124 in. lbs.).
  3. Connect glow plug wiring harness (2) to all four glow plugs (1).
  4. Install fuel rail. Refer to RAIL, FUEL, INSTALLATION or RAIL, FUEL, INSTALLATION .
  5. Connect the negative battery cable.
scientia non olet · About Brad's Car Manuals