Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Jeep >> 2012 >> Wrangler Rubicon, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Sensor, Coolant Temperature >> Installation >> 2.8L

Sensor, Coolant Temperature: Installation: 2.8L

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
Fig 1: Thermostat Housing
GC0145357Courtesy of CHRYSLER GROUP, LLC
  1. Install coolant temperature sensor in thermostat housing. Tighten sensor to 11 N.m (8 ft. lbs.) torque.
  2. Install the thermostat housing onto engine. Refer to THERMOSTAT, INSTALLATION .
scientia non olet · About Brad's Car Manuals