Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Jeep >> 2012 >> Wrangler V6-3.6L >> Repair and Diagnosis >> Body and Frame >> Seats >> Seat Temperature Control Module >> Service and Repair >> Heated Seat Module - Installation

Heated Seat Module - Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches





INSTALLATION

CAUTION: Properly align the tab and retainer for the Heated Seat Module (HSM) to the holes in the instrument panel support, prior to engagement. Failure to follow these instructions may result in damage to the HSM tab and retainer.





1. Position the Heated Seat Module (HSM) (1) to the instrument panel and connect the wire harness connector (3).
2. Align the tab and push-pin retainer to the holes in the instrument panel support (2) and fully engage the retainer to the support.
3. Install the radio Radio - Installation.
4. Reconnect the negative battery cable.
5. Verify proper heated seat system operation.