Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Jeep >> 2018 >> Grand Cherokee Trackhawk >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Cooling System >> Engine >> Sensor, Coolant Temperature >> Installation >> 3.6L

Sensor, Coolant Temperature: Installation: 3.6L

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
GC0173756Courtesy of CHRYSLER GROUP, LLC
  1. Install the Engine Coolant Temperature (ECT) sensor (1) into the thermostat and turn clockwise 1/4 turn to lock in place.
    GC0173772Courtesy of CHRYSLER GROUP, LLC
  2. Verify that the lock tab (1) has properly engaged.
    GC0173597Courtesy of CHRYSLER GROUP, LLC
  3. Connect the wire harness connector to the ECT sensor (1).
  4. Fill the cooling system. Refer to STANDARD PROCEDURE .
  5. Install the air cleaner body. Refer to INSTALLATION .
  6. Connect the negative battery cable.