Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Jeep >> 2021 >> Cherokee Trailhawk >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System (Service Information) >> Generator >> Installation >> 2.4L

Charging System (Service Information): Generator: Installation: 2.4L

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
GC0156074Courtesy of CHRYSLER GROUP, LLC
  1. Install the generator to the engine block bolts (1, 4) and tighten to the proper torque specifications. Refer to TORQUE SPECIFICATIONS  .
  2. Install the positive cable to the rear of the generator stud (2) and tighten the nut to the proper torque specifications. Refer to TORQUE SPECIFICATIONS  .
  3. Connect the field generator wire harness connector (3).
    GC0173256Courtesy of CHRYSLER GROUP, LLC
  4. Reposition the A/C compressor to its upright installed position and tighten the inner A/C compressor mounting bolt (2) to the proper torque specifications. Refer to TORQUE SPECIFICATIONS  .
  5. Install the A/C compressor forward mounting bolts (1) and tighten to the proper torque specifications. Refer to TORQUE SPECIFICATIONS  .
  6. Install the accessory drive belt. Refer to BELT, SERPENTINE, INSTALLATION .
  7. Install the resonator. Refer to INSTALLATION .
  8. Install the engine cover. Refer to INSTALLATION .
  9. Connect the negative battery cable(s). Refer to NEGATIVE CABLE .