Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Jeep >> 2021 >> Compass Altitude, FWD >> Repair and Diagnosis >> Engine Performance >> Ignition System (Service Information) >> Spark Plug >> Removal And Installation >> 2.4L >> Removal

Removal And Installation: 2.4L: Removal

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the engine cover. Refer to COVER, ENGINE, REMOVAL AND INSTALLATION or COVER, ENGINE, REMOVAL AND INSTALLATION or COVER, ENGINE, REMOVAL AND INSTALLATION .
  3. Remove the ignition coil. Refer to COIL, IGNITION, REMOVAL AND INSTALLATION .
    GC0169072Courtesy of CHRYSLER GROUP, LLC
    NOTE:

    Prior to loosening the spark plug, use compressed air to blow out any debris that might be in the spark plug tube.

  4. Using the appropriate socket (1a), remove the spark plug (1b) from the cylinder head.
scientia non olet · About Brad's Car Manuals