Torque Specifications
TORQUE SPECIFICATION
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | COMMENT |
|---|---|---|---|---|
| Transmission Housing to Battery Negative | 15 | 133 | ||
| Battery Tray to Body | 22 | 16 | ||
| Battery Tray Bracket to Body | 22 | 16 | ||
| B+ Terminal to Battery | 6 | 53 | ||
| Retainer Bracket to Battery Tray Assembly | 14 | 124 | ||
| Left Front Inner Rail to Battery Negative | 15 | 133 | ||
| Negative Cable to IBS | 11 | 8 | 97 | |
| IBS Sensor to Negative Post | 6 | 53 | ||
| AUX Battery Nut to Positive Cable | 5.5 | 49 | ||
| AUX Battery Nut to Negative Cable | 5.5 | 49 | ||
| AUX Battery positive post - M6 Double ended Torx Stud | 6 | 53 | ||
| AUX Battery negative post - M6 Double ended Torx Stud | 6 | 53 | ||
| Starter Harness to Starter | 9 | 80 | ||
| Starter Motor to Block 2.4L (ED6) | 48 | 35 | ||
| Starter Motor to Block 2.4L w/ESS (EDD) | 54.5 | 40 | ||
| Ignition Switch to Steering Column | 20 | 15 | Do not reuse these fasteners. If removed, a NEW fastener must be installed and tightened to specifications. | |
| Starter to Transmission 1.6-2.0L | 24 | 18 | ||
| Starter to Transmission 1.6-2.0 w/ESS | 27 | 20 | ||
| Starter to Transmission 1.4L | 26 | 19 | ||
| Starter Wire to B+ | 10 | 89 | ||
| Generator B+ Wire to Generator | 15 | 133 | ||
| Generator Bracket to Cylinder Block 1.6-2.0 w/ESS | 55 | 41 | ||
| Generator Bracket to Cylinder Block 1.4 w/ESS | 125 | 92 | ||
| A/C and Generator Bracket to Engine 1.4L w/ESS | 9 | 80 | ||
| Generator to Generator Bracket 2.4L and 2.4L w/ESS | 23 | 17 | ||
| Generator Harness to Engine 2.4L and 2.4L w/ESS equipped with either the C635 or the AW60 | 50 | 37 | ||
| Generator Harness to Engine 2.4L or 2.4L w/ESS | 11 | 97 | ||
| Generator Bracket to Cylinder Block 2.4L or 2.4L w/ESS | 50 | 37 | ||
| Generator Bracket 1.6L or 2.0L | 70 | 52 | ||
| Voltage Stabilizer Module Bolt to Instrument Panel | 6 | 53 | ||
| Keyless Ignition Module to Bracket Retainer Bolt | 1.5 | 13 | ||
| Glow Plug | 8 | 71 |