Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Jeep >> 2021 >> Grand Cherokee Trackhawk >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Cooling System >> Engine >> Heater, Engine Block >> Installation >> 3.0L Diesel

3.0L Diesel

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
GC0158038Courtesy of CHRYSLER GROUP, LLC
  1. Clean and inspect the threads in the cylinder block and heater element.
  2. Coat the heater element threads with Loctite® 572 thread sealer.
  3. Install the engine block heater (1) into the engine block and tighten to 40 N.m (30 ft. lbs.).
    GC0158144Courtesy of CHRYSLER GROUP, LLC
  4. Connect the block heater power cord (3).
  5. Fill the cooling system with the recommended coolant. Refer to COOLANT SYSTEM AIR EVACUATION  .
  6. Connect the negative battery cable.
  7. Start and warm the engine.
  8. Check the block heater for leaks.
scientia non olet · About Brad's Car Manuals