Removal and Installation

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

MAF SENSOR

REMOVAL

NOTE: Be sure ignition key is in OFF position before starting this repair.

1. Disconnect connector from mass air flow sensor by depressing the spring latch.
2. Loosen hose clamp and disconnect air intake hose from sensor.
3. Remove two bolts from sensor bracket.

4. Remove sensor from air cleaner housing.

INSTALLATION

1. Install mass air flow sensor onto air cleaner housing and tighten two bolts.
2. Reconnect air intake hose to sensor and tighten clamp.
3. Reconnect mass air flow sensor connector.