Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Kia >> 2005 >> Optima EX, 2.7 8 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System/Fuel System - 2.7L >> MFI Control System >> Water Temperature Sensor (WTS) >> Installation

Water Temperature Sensor (WTS): Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Apply sealant LOCTITE 962T or the equivalent to the threaded portion.
  2. Install the Water Temperature Sensor (WTS) and tighten it to the specified torque.

    Tightening Torque: 20~40 N.m (2~4 kg. m, 14~29 lb. ft)

  3. Securely connect the harness connector.
scientia non olet · About Brad's Car Manuals