Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Kia >> 2007 >> Amanti >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Control System >> Input Speed Sensor >> Installation

Input Speed Sensor: Installation

Download the full database via torrent (~1.1 TB)
  1. Install the new O-ring to the input shaft speed sensor.
  2. Install the input shaft speed sensor.

    TORQUE: 10-12 N.m (1.0-1.2 kgf.m, 7-8 lb-ft)

    CAUTION: While installing the input shaft speed sensor, do not allow dust or other foreign particles to enter the transaxle.
  3. Check the connector for dust, dirt, or oil, and then connect the connector securely.
  4. Installation is the reverse of removal.
scientia non olet · About Brad's Car Manuals