Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Kia >> 2007 >> Rondo Base >> Repair and Diagnosis >> Electrical >> Body Electrical >> Body Electrical System >> Immobilizer Control System >> DTC P1675 Transponder Programming Error >> Monitor DTC Status

Monitor DTC Status

Download the full database via torrent (~1.1 TB)
  1. Connect scantool to Data Link Connector (DLC)
  2. Ignition "ON" & engine "OFF"
  3. Select "Diagnostic Trouble Codes (DTCs)" mode and monitor "DTC Status" parameter
  4. Is the DTC B1675 present?

    YES 

    Go to "COMPONENT INSPECTION " procedure.

    NO 

    Fault is intermittent caused by poor contact in SMARTRA's and/or ECM's connector or was repaired and ECM memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

scientia non olet · About Brad's Car Manuals