Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Kia >> 2007 >> Rondo Base >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System (F4A42) >> Output Speed Sensor >> Replacement

Output Speed Sensor: Replacement

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Remove the battery and air cleaner, (see "TRANSAXLE RANGE SWITCH REPLACEMENT ")
  2. Remove the output shaft speed sensor (A).
    Fig 1: Identifying Output Shaft Speed Sensor
    G05186511Courtesy of KIA MOTORS AMERICA, INC.
    1. Disconnect the output shaft speed sensor connector (B).
    2. Remove the bolt (C).
    3. Inspect the output shaft speed sensor bore.
  3. Apply a light coat of automatic transaxle fluid to the O-ring seal before installation.
  4. Installation is the reverse of removal.
scientia non olet · About Brad's Car Manuals