Engine Control Module: Service and Repair

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

REPLACEMENT
1. Turn ignition switch off.
2. Disconnect the battery (-) cable from the battery.

3. Remove the resonator (A).

4. Disconnect the ECM connectors (A).
5. Unscrew the ECM mounting bolts (B) and remove the ECM from the bracket (C).
6. Install a new ECM

ECM installation bolts : 9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2. 8.7 Ibf.ft)