Monitor DTC Status

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

Connect scan tool to Data Link Connector (DLC).
Ignition "ON" & engine "OFF"
Select "Diagnostic Trouble Codes (DTCs)"mode and monitor "DTC Status" parameter
Is the DTC B1675 present?
YES

Go to COMPONENT INSPECTION procedure

NO

Fault is intermittent caused by poor contact in SMARTRA's and/or PCM (ECM's) connector or was repaired and PCM (ECM) memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.