Repair Procedures: Removal
- Disconnect the battery negative cable and wait for at least three minutes before beginning work.
- Remove the ignition key from the vehicle.
- Disconnect the DAB, PAB, SAB, CAB and BPT connectors.
- Remove the floor console and heater ducts. (Refer to FLOOR CONSOLE REPLACEMENT
)
- Disconnect the SRSCM harness connector from the SRSCM.
Courtesy of KIA MOTORS AMERICA, INC.
- Remove the SRSCM mounting nuts(3EA) from the SRSCM, then remove the SRSCM.
Courtesy of KIA MOTORS AMERICA, INC.