Ignition Coil: Service and Repair
Removal and Installation
1. Disconnect the ignition coil connectors (A).
2. Remove the ignition coils (A).
Tightening torque :
3.9 - 5.9N.m (0.4 - 0.6kgf.m, 2.9 - 4.3lb-ft)
3. Installation is the reverse of removal.
Removal and Installation
1. Disconnect the ignition coil connectors (A).
2. Remove the ignition coils (A).
Tightening torque :
3.9 - 5.9N.m (0.4 - 0.6kgf.m, 2.9 - 4.3lb-ft)
3. Installation is the reverse of removal.