Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Kia >> 2015 >> Optima Limited >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L - Optima >> Engine Coolant Temperature Sensor (ECTS) >> Repair Procedures >> Removal

Repair Procedures: Removal

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the engine coolant temperature sensor connector (A).
    Fig 1: Engine Coolant Temperature Sensor Connector
    G07379724Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the spring clip (A), and then pull the sensor from the water temperature control assembly.
    Fig 2: Locating Spring Clip
    G07379725Courtesy of KIA MOTORS AMERICA, INC.
    CAUTION: Note that engine coolant may be flowed out from the water temperature control assembly when removing the sensor.
  4. Supplement the engine coolant. Refer to COOLING SYSTEM .
scientia non olet · About Brad's Car Manuals