Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Kia >> 2016 >> K900 V8 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 5.0L >> Accelerator Position Sensor (APS) >> Repair Procedures >> Removal

Repair Procedures: Removal

Download the full database via torrent (~1.1 TB)
  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
  3. Disconnect the accelerator control connector (B).
  4. Remove the accelerator pedal in the direction of "Removal direction" in the figure after removing the installation bolt (B).
Fig 1: Disconnecting Accelerator Control Connector
G11802917Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Brad's Car Manuals