Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Kia >> 2016 >> K900 V8 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 5.0L >> Fuel Tank Pressure Sensor (FTPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Open the trunk.
  2. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  3. Remove the floor mat in the trunk (Refer to Body - "TRUNK TRIM ").
  4. Remove the Partition board trim (A).
    Fig 1: Removing Partition Board Trim
    G11802926Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the service cover (A) in the trunk.
    Fig 2: Removing Service Cover Into Trunk
    G11802927Courtesy of KIA MOTORS AMERICA, INC.
  6. Disconnect the fuel tank pressure sensor connector (A).
  7. Remove the fuel tank pressure sensor after removing the mounting bolt.
Fig 3: Disconnecting Fuel Tank Pressure Sensor Connector
G11802928Courtesy of KIA MOTORS AMERICA, INC.