Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Kia >> 2016 >> Sorento SX, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.3L >> Accelerator Position Sensor (APS) >> Repair Procedure >> Removal

Repair Procedure: Removal

Download the full database via torrent (~1.1 TB)
  1. Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
  2. Disconnect the accelerator position sensor connector (A).
  3. Remove the upper mounting cap (B), and then remove the mounting nut (C).
  4. Remove the lower mounting cap (D), and then remove the mounting nut (E).
Fig 1: Locate Upper Mounting Cap And Mounting Nut
G11872171Courtesy of KIA MOTORS AMERICA, INC.
Fig 2: Locate Lower Mounting Cap And Mounting Nut
G11872172Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Brad's Car Manuals