Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Kia >> 2016 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 1.6L >> Rail Pressure Sensor (RPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

Download the full database via torrent (~1.1 TB)
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Release the residual pressure in fuel line (refer to "RELEASE RESIDUAL PRESSURE IN FUEL LINE .")
  3. Remove the Alternator.

    (Refer to "ALTERNATOR .")

  4. Disconnect the rail pressure sensor connector (A), and then remove the sensor (B) from the delivery pipe.
G11950114Courtesy of
scientia non olet · About Brad's Car Manuals