Repair Procedures - Revised: Toe

Fig 1: Checking Front Wheel Alignment

Courtesy of KIA MOTORS AMERICA, INC.

B - A > 0: Toe In (+)

B - A < 0: Toe Out (-)

Fig 1: Checking Rear Wheel Alignment

Courtesy of KIA MOTORS AMERICA, INC.

B - A > 0: Toe In (+)

B - A < 0: Toe Out (-)

Toe is preset at the factory, so it does not need to be adjusted. If the toe is not within the standard value, replace or remedy the damaged parts and then inspect again.

Toe: 

Total: 0.5° (+0.4°/-0.5°)

Individual: 0.25° (+0.2°/-0.25°)