Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Kia >> 2018 >> Stinger Base, AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Windows >> Power Window Switch >> Repair Procedures >> Removal >> Driver Power Window Switch

Driver Power Window Switch

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
CAUTION:
  • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
  • When removing the interior trim pieces, use a plastic panel removal tool not to damage the surface.
  • Be careful to store and handle the trim when removing/installing because lubricant and oil can leave a stain on the trim.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the driver front door trim.

    (Refer to Body - " FRONT DOOR TRIM  ") 

  3. Disconnect the power window switch connector (A).
    G12798727Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the power window switch (A) after loosening the mounting screws.
G12798728Courtesy of KIA MOTORS AMERICA, INC.
G12798729Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Brad's Car Manuals