Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Kia >> 2019 >> Niro EX >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (HEV) >> CVVT Oil Control Valve (OCV) >> Repair Procedures >> Removal

Repair Procedures: Removal

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches

[CVVT Oil Control Valve (Exhaust)] 

  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. OCV extension wiring connector (A).
  3. Release the wiring mounting bracket (B) after loosening the mounting bolt.
    G12998271Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the mounting bolt (A), and then remove oil control valve & extension wiring (B) from the engine.

    CVVT oil control valve mounting bolt: 

    9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

    G12998272Courtesy of KIA MOTORS AMERICA, INC.
  5. Disconnect the oil control valve (A) from the extension wiring (B).
G12998273Courtesy of KIA MOTORS AMERICA, INC.